|
Synthetic Diamond Abrasives |
| Grade |
Description |
Sizes |
Applications |
Work-piece Materials |
|
| DID 18 |
Diamond grit for extremely
high demands. Blocky, very uniformly cubo-octahedral shaped diamond
crystals with extremely high toughness & thermal stability |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
for Diamond Tools:
stepped segments for large circular saws, segments for circular saws,
drill bits, milling tools, dressing tools |
Granite, Sandstone, Marble,
Concrete, Refractories, Asphalt |
 |
| DID 16 |
Diamond grit for high
demands. Blocky, uniformly cubo-octahedral shaped diamond crystals
with very high toughness & thermal stability |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251
|
Stepped segments for large
circular saws, segments for circular saws & frame saws, drill bits,
milling tools, wire saw beads, band saws, dressing tools |
Granite, Sandstone, Marble,
Limestone, Concrete, Asphalt, Refractories, Ceramics, Glass |
 |
| DID 14 |
Diamond grit for standard
demands. Blocky, mainly uniformly cubo-octahedral shaped diamond
crystals with high toughness & thermal stability |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Segments for circular saws &
frame saws, drilling tools, wire saw beads, electroplated tools |
Different kinds of Medium &
Soft Stone, Marble, Travertine, Limestone, Slate, Ceramics, Glass &
Silicon |
 |
| DID 12 |
Diamond grit for standard
demands. Blocky diamond grit, sharp-edged grains with rough fracture
surfaces & original crystal surfaces |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Electroplated tools,
wire saw beads,
free-cutting tools |
Soft stone, Ceramics, Glass,
Fiberglass, Reinforced Plastics |
 |
DID 9
|
An excellent combination of
reasonably tough diamond & friable diamond particles, with good whole
shapes & cubo-octahedral crystals. The impact strength is good for
moderate & medium applications |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Highly recommended
for Electroplating applications |
Stone, Concrete |
 |
DID 1
|
Designed to be used for very
light applications mainly suitable where tool life is not important.
However cutting ability is excellent due to broader distribution of
shapes |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Highly recommended for
electroplating applications & small, 4-inch cutting blades, for stone
& concrete. Also recommended as an additive where high diamond
concentration is required |
Stone, Concrete |
 |
Sawing
