| Synthetic
Diamond Abrasives |
| Grade |
Description |
Sizes |
Applications |
Work-piece Materials |
|
| DID 18 |
Diamond grit for extremely
high demands. Blocky, very uniformly cubo-octahedral shaped diamond
crystals with extremely high toughness & thermal stability |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
for Diamond Tools:
stepped segments for large circular saws, segments for circular saws,
drill bits, milling tools, dressing tools |
Granite, Sandstone, Marble,
Concrete, Refractories, Asphalt |
 |
| DID 16 |
Diamond grit for high
demands. Blocky, uniformly cubo-octahedral shaped diamond crystals
with very high toughness & thermal stability |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251
|
Stepped segments for large
circular saws, segments for circular saws & frame saws, drill bits,
milling tools, wire saw beads, band saws, dressing tools |
Granite, Sandstone, Marble,
Limestone, Concrete, Asphalt, Refractories, Ceramics, Glass |
 |
| DID 14 |
Diamond grit for standard
demands. Blocky, mainly uniformly cubo-octahedral shaped diamond
crystals with high toughness & thermal stability |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Segments for circular saws &
frame saws, drilling tools, wire saw beads, electroplated tools |
Different kinds of Medium &
Soft Stone, Marble, Travertine, Limestone, Slate, Ceramics, Glass &
Silicon |
 |
| DID 12 |
Diamond grit for standard
demands. Blocky diamond grit, sharp-edged grains with rough fracture
surfaces & original crystal surfaces |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Electroplated tools,
wire saw beads,
free-cutting tools |
Soft stone, Ceramics, Glass,
Fiberglass, Reinforced Plastics |
 |
DID 9
|
An excellent combination of
reasonably tough diamond & friable diamond particles, with good whole
shapes & cubo-octahedral crystals. The impact strength is good for
moderate & medium applications |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Highly recommended
for Electroplating applications |
Stone, Concrete |
 |
DID 1
|
Designed to be used for very
light applications mainly suitable where tool life is not important.
However cutting ability is excellent due to broader distribution of
shapes |
US mesh:
25/30 - 60/70
FEPA:
D711 - D251 |
Highly recommended for
electroplating applications & small, 4-inch cutting blades, for stone
& concrete. Also recommended as an additive where high diamond
concentration is required |
Stone, Concrete |
 |
DEV
MB 6200+ |
Is a premium synthetic
diamond for use in metal bond applications. The crystals are blocky &
uniformly cubo-octahedral in shape with high impact. Their increased
thermal stability & toughness extends the life of the tool & are
recommended where high material removal rates are required |
US mesh:
60/70 - 325/400
FEPA:
D251 - D46 |
Glass: core-drilling,
pencil-edging
Granite & Marble: trimming, polishing
Crystal & Glass: grooving, grinding |
Glass, Granite, Marble,
Crystal |
 |
DEV
MB 6200++ |
Finest quality of synthetic
diamond for use in metal bond applications. The crystals are well
defined cubo-octahedral in shape with lowest levels of internal
impurities. Their superior strength & thermal stability enables them
to be used where material removal rates are most severe |
US mesh:
60/70 - 325/400
FEPA:
D251 - D46 |
Granite & Marble: polishing
Granite & Ceramic Tile: sawing,
enhanced pencil-edging
Tungsten Carbide button |
Glass, Granite, Marble,
Ceramic Tiles, Crystal |
 |
DEV
MB 6200
|
Is an uncoated Synthetic
Diamond for use in metal bond applications. The crystals of this
material are more blocky than Dev RS6100, but is still designed to
give good bond retention & optimum performance |
US mesh:
60/70 - 325/400
FEPA:
D251 - D46 |
Glass: edging & beveling
Granite, Marble & Limestone: trimming, polishing
Tungsten Carbide & Cast Iron: grinding |
Glass, Granite, Marble,
Limestone, Cast-iron |
 |
DEV
MB 6200 I |
Highly recommended for
applications where grinding forces are low per crystal. Due to the
semi-blocky shape, it provides more free cutting & grinding action,
and is recommended for low material removal grinding applications |
US mesh:
60/70 - 325/400
FEPA:
D251 - D46 |
Glass: seaming, edging &
bevel-polishing
Granite, Marble & Limestone: polishing
Ceramic: dental burrs & cut-off wheels |
Glass, Granite, Marble,
Limestone, Dental Ceramics, Cast-iron |
 |
DEV
MB 6200 II |
Friable, synthetic diamond,
recommended for applications where grinding forces are very low. Due
to the angular shape of the diamond, it helps to regenerate sharp
cutting edges faster. It provides more free cutting & grinding action,
and is recommended for low material removing grinding applications |
US mesh:
60/70 - 325/400
FEPA:
D251 - D46 |
Highly recommended for
electroplating applications
Glass: bevel polishing
Granite & Marble: polishing
Ceramic: dental burrs & cut-off wheels, finishing & polishing |
Glass, Granite, Marble,
Limestone, Dental Ceramics, Cast-iron |
 |
DEV
MB 6500 |
Synthetic micron diamond
powder with high standard in regards to both shape & size
distribution. Has extremely efficient metal bond retention & the
crystals have strong cubo- octahedral shape with efficient cutting
edges |
Available in
all micronized grades |
Lapping, Polishing |
|
 |
DEV
RS 6100 |
Uncoated, synthetic diamond
for use in resin-bond applications. It's high friability ensures
controlled breakdown of crystals. Strong bond retention results from
it's irregular shape & rough surface area, allowing continuous cutting
action |
US mesh:
60/70 - 325/400
FEPA:
D251 - D46 |
Cutting, Grinding |
|
 |
DEV
RS 6600 |
Synthetic micron powder
consisting of uniformly semi-blocky shaped crystals, friable, ideally
suited for resin-bond application |
Available in all micronized
grades |
Lapping, Polishing |
|
 |
DEV
RS 6600 Premium |
Synthetic micron powder
consisting of uniformly semi-blocky shaped crystals, friable, ideally
suited for resin-bond applications |
Available in all micronized
grades |
Lapping, Polishing |
|
 |
Natural Diamonds
